GUANG ZHOU CITY FREESEA ELECTRICAL CO., LTD
GUANG ZHOU CITY FREESEA ELECTRICAL CO., LTD
Add to Cart
| Model | Voltage | HZ | Power(KW) | Power(HP) | Hmax(m) | Qmax(m³/h) | Port Size(inch/mm) |
| FL-150 | 220V-380V | 50/60 | 1.1 | 1.5 | 18 | 30 | 63 2” |
| FL-200 | 220V-380V | 50/60 | 1.5 | 2.0 | 19 | 35 | 63 2” |
| FL-300 | 220V-380V | 50/60 | 2.2 | 3.0 | 20 | 38 | 63 2” |
| FL-350 | 220V-380V | 50/60 | 2.6 | 3.5 | 21 | 40 | 63 2” |
| FL-400 | 220V-380V | 50/60 | 3.0 | 4 | 22 | 48 | 63 2” |
MULTI-APPLICATION:
Sauna, SPA, Swimming pool, water park , water treatment.
DESCRIPTION:
This 3 HP 38000l/h water pump can improve significantly the water quality and clear swimming pools and whirlpools.
The pump has low consumption, high capacity and its operation are practically maintenance-free.
The motor and pump shaft does not come into contact with the swimming pool water.
The pump can be positioned max. 4m below the water level.
The swimming pool pump is the heart of a swimming pool system.
It is mounted directly in front of the filter vessel.
The pool pump draws the water from the skimmer to the pool and pushes the water through the filter medium.
This pump is ideal for pool pumping, cleaning, hot water circulation etc. Sometimes people use it for increasing the water pressure in the pipe, garden sprinkling, and irrigation. It only needs solar off grid power to get work! Delivery head of 14 meters and suction up to 8 meters. This pump is simple to install and easy to use. No need of sophisticated knowledge of pumping but just a little imagination of how much you can do with it. It will pump up the water in no time.
Working Conditions:
M edium temperature:5~50 C
Environment temperature:< 60 C2. Application :
FRE ESEA circulation&filtration pump canbe used for
aquaculture, water project, large sizeswimming pool,water park, etc.
Pump Use Precautions:
1. If the pump has any small faults, remember not to let it work. If the filler of the pump shaft is worn out, it should be added in time. If the pump is used continuously, it will leak. The direct effect of this is that the motor consumes more energy and can damage the impeller.
2. If the pump has a strong vibration during use, be sure to stop and check what is the cause, otherwise it will cause damage to the pump.
3. When the bottom valve of the pump leaks, some people will fill it into the inlet pipe of the pump with dry soil and flush it to the bottom of the valve. This is not desirable. Because when the dry soil is put into the water inlet pipe, when the water pump starts to work, the dry soil will enter the pump, which will damage the water pump impeller and the bearing, which shortens the service life of the water pump. When the bottom valve leaks, it must be repaired. If it is serious, it needs to be replaced.
4, the pump must pay attention to maintenance after use, for example, when the pump is used up, the water in the pump should be cleaned, it is best to remove the water pipe and then rinse with water.
5, the tape on the pump should also be removed, then rinse with water and dry in the light, do not put the tape in a dark and humid place. The tape of the pump must not be stained with oil, and do not apply some sticky material to the tape.
6. Carefully check the impeller for cracks. If the impeller is fixed on the bearing, if it is cracked or loose, it should be repaired in time. If there is mud on the pump impeller, it should be cleaned up.