Single Phase Variable Frequency Drive DC Water Pump For Agriculture Spraying

New Look 24v DC Pump Variable Frequency Drive Water Pump for Agriculture Spraying

Paramerter:

Features:

1. Beautiful New Look, Safe, Reliable and Super Quiet. Ceramic impeller shaft is

resistant to corrosion even from saltwater. Epoxy Sealed, High Grade

ABS Pump Housing, Stator Bobbin wound with Pure Copper Wiring,

2. CE,GS,UL-Certified Plug and Copper Enameled Power Cables.

3. Extremely low power consumption. DC power can be connected directly to

batteries which use renewable energy sources (solar, wind, potential, etc).

Easy to Install and Clean. No tools required to install, uninstall or disassemble.

4. This amphibious pump is designed for small to medium size aquariums, ponds,

fountains, water gardens and hydroponic systems.

Directions for use

You need to connect the power cord and the pump cord to this controller.

Turn on the pump by connecting to the power, turn off the pump by unplug the power.

The pump will stop working when input voltage is too high, upon no water, impeller blocked, to restart the pump please re-plug the power.

If you find the pump is failed to pump water at the beginning, please try to unplug and re-plug the power to get rid of the air inside the pump, repeat that for several times then the pump will work normally.

Use as external/inline water pump

Don’t let the pump run dry, it will damage the motor. When use the pump externally, make sure there are full of water in the pump body and the pipes before plug in power. Please tighten all nuts and connections to make sure no water will leak out, or you can use extra glue to reinforce the connection. Please note the controller must be placed indoors, it's not waterproof. Place the pump at lower position than the water level.

Use as internal submersible water pump

Max working water depth for this water pump is 5ft. Please check and clean the pump regularly. Prohibit to use the pump in flammable liquids. Working water temps: 34-95 Fahrenheit degrees. When use the pump internally, please keep the pump fully submersible in water before plug in power. Place the controller indoors. Please use one of the 2 removable shells to prevent pump blocking.

Removable Impeller

• FREESEA aquarium water pump is easy to be assembled and disassembled by hands, without using tools.
• You can look to the product image on the detail page to find the structural map.
• We use high performance and durable impeller, with ceramic shaft, magnetic drive, so this fish tank water pump has longer service life.
• The water pump will auto shut off when water level is too low, the impeller will stop working, want to restart the pump, please unplug the power and re-plug it.