Solar Power Hydroponic Water Pump Energy Saving For Aquarium DC 12V 24V

Energy Saving Solar Power Hydroponic Water Pump For Aquarium DC 12V 24V

Features:

• #1 HAS PRE-FILTER INCLUDED - Pre-filter on the intake prevents debris from entering your pump and extend the life of your pump
• DURABLE QUALITY - Our Polished Aluminum Oxide Ceramic Impeller Shaft insures long pump life because it is non-corrodible and more than 3 times as hard as stainless steel. Epoxy Resin Encasement of key internal motor components prevents unwanted conductivity and corrosion of metal parts
• SAFE & EASY - Safe for fish with no exposed copper. Easy to clean with no tools required to disassemble and clean filter/impeller. Our Electric Cord is waterproof, 18# gauge copper wire, molded plug with ground, heavy duty flexible vinyl jacket, resists oil/grease/moisture, abrasion resistant and very good flexibility at all temperatures

• In order to ensure safety, all products are strictly inspected and tested, please according to the instructions for operation in case pumps are destroyed.

  1. There is inside the pump or dirt into obstacles will reduce the effect of use of the product, if the pumps, pump out dirty cleaning of dirt.

  2. Clean water pump, remove the front cover and waterleaf, with little brush or water, dirt, don't move pump shaft.

  If the pump does not operate, according to the following verification:

  1. Check whether the circuit is damaged, for another input to ensure that the pump power;

  2. Ensure that the inlet without dirt;

  3. Take out the rotor to ensure that the rotor is not damaged or blocked.

• Note: 1.Please use socket with stable voltage and keep the motor running within rated power to ensure long lifespan.

  2.Prohibit no-load running. Put the pump into water first before connecting power supply. When changing water, please disconnect power supply. It would shorten its lifespan and lead to making loud noises when running in the air for long time.

  3.If the product suddenly stop working or make noises, which may caused by debris blockage. Please clean it regularly about once every two months, or add some olive oil on the rotor.

  4.Please note if the water level, layout of the water tank match the bump power before purchasing. If the water is too little, motor power is too high, so as the water flow level, the swashing water would make loud noises. Different bump suits different water tank.

  5.The maximum flow rate is 80GPH; there might be a plus-minus tolerance, Insufficient power and insufficient frequency would affect the flow rate.If connected with a water pipe, the maximum flow rate would less than 80GPH. If the water sprays out the container, the flow rate would also less than 80GP