GUANG ZHOU CITY FREESEA ELECTRICAL CO., LTD
GUANG ZHOU CITY FREESEA ELECTRICAL CO., LTD
Add to Cart
FREESEA Aquarium Heater Aquatic Turtle Heater With Intelligent LED Temperature Display For Fish Tank
FREESEA Digital Smart Aquarium Heater, a compact submersible heater, is for small tanks. It has thermometer inside, without the need of excess equipments in small tanks. The equipped digital display is easy to set. The sensitive thermostat at the core of the oval shaped unit is excel at maintaining constant water temperature.
Precautions
● Temperature control switch box should be higher than water surface.
● Heater should be completely submerged in the water to work properly.
● Please check whether this product uses a matching power grid voltage (110V-120V/60Hz).
● This product can not be repaired or modified by yourself, please ask supplier for suggestion.
● Turn off the power supply for 10 minutes before cleaning the tank or maintaining the heater.
● The power socket for heater must have a broken circuit switch.
● Please don’t use wet hand to install and maintain this heater, avoid from electric shock Temperature control box is not water proof, please put it above water. If its accidentally fall into water, Please unplug the power immediately and dry it out with blow dryer before use.
How to adjust temperature:
There is a regulator connect with power cord, just press the button after heater has been installed,
and you can will see the LED display shows °F,
press the button until you see the display shows your expecting temperature (display 59~93℉ in cycle by),
and then leave it for heating up.
For example:
Expecting temperature is : 80℉ Heater display shows: 70℉ Then, Press the regulator 10 times,
then you will see the display shows from 70 to 80°F.
When you see the display shows 80°F,
then leave it for heating.
1. The heater must be fully submerged in water, or it will cause the malfunction of the product 2. The power socket should be set higher than the sink
3. Be sure to use the heater under specified voltage
4. Make sure to unplug the power before any cleaning, maintenance or moving of the heater, and make sure it has been cooled down for at least 5 minutes
5. Do not use the heater if the power cord and plug is damaged
6. Do not insert or pull the plug with wet hands, electric shock may be caused
Details:
| Model | FS-28 |
| Power | 50W |
| Color | Black |
| Suitable tank size | 1-10 gallon fish tank |
| Power supply | Electric |
| Cable length | 1m |
| Material | ABS Plastic Shell |