Hydroponic Solar Water Pump For Hydroponics Systems Pump For Hydroponics
| Model |
Power W |
H-max M |
Output L/H |
Hose Size mm |
Dimension mm |
| FS-004 |
4 |
0.6 |
350 |
8.5 |
35X35X25 |
| FS-007 |
7 |
0.85 |
450 |
8.5/13 |
37X35X30 |
| FS-008 |
8 |
1.2 |
600 |
8.5/13 |
45X45X36 |
| FS-015 |
15 |
1.6 |
800 |
8.5/13 |
70X52X62 |
| FS-021 |
21 |
2 |
1200 |
16/19/25 |
90X60X72 |
| FS-030 |
30 |
2.2 |
2000 |
16/19/25 |
90X60X72 |
| FS-045 |
45 |
2.5 |
2500 |
16/19/25 |
110X72X100 |
| FS-050 |
50 |
2.8 |
2800 |
16/19/25 |
135X95X113 |
| FS-060 |
60 |
3 |
3000 |
16/19/25 |
125X72X100 |
| FS-080 |
80 |
3.5 |
3500 |
16/19/25 |
150X90X125 |
| FS-095 |
95 |
4.5 |
4500 |
16/19/25 |
155X88X125 |
| FS-150 |
150 |
5 |
5000 |
16/19/25 |
175X105X140 |
|
Features:
- #1 HAS PRE-FILTER INCLUDED - Pre-filter on the intake prevents debris from entering your pump and extend the life of your pump
- DURABLE QUALITY - Our Polished Aluminum Oxide Ceramic Impeller Shaft insures long pump life because it is non-corrodible and more than 3 times as hard as stainless steel. Epoxy Resin Encasement of key internal motor components prevents unwanted conductivity and corrosion of metal parts
- SAFE & EASY - Safe for fish with no exposed copper. Easy to clean with no tools required to disassemble and clean filter/impeller. Our Electric Cord is waterproof, 18# gauge copper wire, molded plug with ground, heavy duty flexible vinyl jacket, resists oil/grease/moisture, abrasion resistant and very good flexibility at all temperatures
- 3 size threaded nozzles. PLEASE NOTE inline and outlet nozzles has different thread size. The thicker ones are for Inline use and the thinner ones are for outlet
- VERSATILE - Circulate and aerate the water, making it more attractive to your fish or turtles. This submersible pump is perfect for aquarium, fountains, spout and hydroponic systems
Description:
- 【VERSATILE】Submersible Water Pump is a multi-functional pump in terms of aquarium cleaning water change, water circulation, transferring water and powering fountain waterfall
- 【WORKS LIKE A CHARM】Easy to use, simply plug in power for quick water draining, this bottom pump can remove water level down to 1/4" and suck out 1/5" debris and fish waste with ease
- 【RUN DRY PROTECTION】This aquarium pump shuts itself off when the protection circuit gets hot. And it runs again once it cool down (It is not auto shut off. You need to turn it off when not in use.)
- 【For 5-30 Gallon Tank】Provides efficient, instant water flow, power: 18W, Maximum flow rate: 215 GPH; Max Lift Height: 5.3ft (power cord's length: 6ft), Presented two different sizes of barb fittings for desired water flow: 1/2" and 5/8"(PS: hose is not included)
- 【Oil-free Magnetic Driven Motor】Ideal for saltwater and freshwater aquariums, ponds, gardens, fountains, bird bathes and hydroponics up to 30 gallon
- 1. Samrt control, dry running automaticly cut power.(Principle:Dry running opreation will increase motor temperature, then the pump will automatically shut down, but the motor will restart working after the temperature goes down. Therefore, when the motor automatically turned off we need to cut off power immediately. This function can effectively reduce the damage caused by dry running.)
-
2. With bottom suction trainer,100% submersible.
3. Maximum flow rate: 330GPH STRONG POWER and HIGH LIFT. Max Lift Height: 6 ft. 40W high efficiency motor for energy saving.
4. Lift height is a max height the water goes up, after connecting the water pipe to the nozzle (Make sure the joint sealed securely and tightly) SUCTION CUP and 5.9Ft POWER CORD. Long enough cord for easy installation.
5. 12 month warranty
